EU Market Access for Telecom Device

In Europe the standards are set by the ETSI (European Standards Institute). These standards include TBR 4 (E1 ISDN PRI), TBR 12 (Unframed E1), TBR 13 (Framed E1), ETS 203 021 , TBR 21(analog equipment), TBR 38 (acoustic analog telephones). Manufacturer declaration of conformity is sufficient for the European CE mark.

REGULATORY AGENCY

• European Commission (EC)

REGULATIONS

• CE marking according to telecom and wireless directives.

• DoC is sufficient for marketing. 

Europe – Telecom

• ETSI ES 203 021-1; ETSI ES 203 021-2; ETSI ES 021-3;

• ETSI EN 301 437; Terminal equipment (TE); Attachment requirements for Pan-European approval for connection to the analogue public switched telephone networks (PSTNs) of TE supporting the voice telephony service in which network addressing, if provided, is by means of dual tone multi frequency (DTMF) signaling

• ETSI TS 101 270-1; Transmission and multiplexing (TM); Access transmission systems on metallic access cables; Very high speed digital subscriber line (VDSL); Part 1: Functional requirements

• TBR 004 Ed.1.95 + A1 (97); Integrated services digital network (ISDN); Attachment requirements for terminal equipment to connect to an ISDN using ISDN primary rate access
  

• TBR 10:1999; Digital enhanced cordless telecommunication (DECT); General terminal attachment requirements; Telephony applications
  

• TBR 012 edition 1:93+A1:96; Business telecommunications (BT); Open network provision (ONP) technical requirements; 2048 kbit/s digital unstructured leased line (D2048U); Attachment requirements for terminal equipment interface

• TBR 013 edition 1:96; Business telecommunications (BTC); 2048 kbit/s digital structured leased lines (D2048S); Attachment requirements for terminal equipment interface

• TBR 15:97; Business telecommunications (BTC); Ordinary and special quality voice bandwidth 2-wire analogue leased lines (A2O and A2S); Attachment requirements for terminal equipment interface

• TBR 17:97; Business telecommunications (BTC); Ordinary and special quality voice bandwidth 4-wire analogue leased lines (A4O and A4S); Attachment requirements for terminal equipment interface

• TBR 38 edition 1:98, Historical; Public switched telephone network (PSTN); Attachment requirements for a terminal equipment incorporating an analogue handset function capable of supporting the justified case service when connected to the analogue interface of the PSTN in Europe

• TBR 003 Ed.1.95 + A1 (97)

• ETSI TS 101 270-1; Transmission and multiplexing (TM); Access transmission systems on metallic access cables; Very high speed digital subscriber line (VDSL); Part 1: Functional requirements

• ETSI TS 102 027 V2.1.1:03; Telecommunications and internet protocol harmonization over networks (TIPHON) technology compliance specification; Draft IETF SIP RFC 3261; Part 2: Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) performance specification

• ETSI TS 101 388 V1.4.1:07; Transmission and multiplexing (TM); Access transmission system on metallic access cables; Asymmetric digital subscriber line (ADSL) -European specific requirements

• ETSI ES 201 912:02; Access and terminals (AT); Short message service (SMS) for PSTN/ISDN; Short message communication between a fixed network short message terminal equipment and a short message service centre

• ETSI ES 202 913 V1.2.2 (2006-01); Access and Terminals (AT); POTS requirements applicable to ADSL modems when connected to an analogue presented PSTN line.

• ETSI EN 300 659-1 V1.3.1 (2001-01) (CID); Access and terminal (AT); Analogue access to the public switched telephone network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 1: On-hook data transmission

• ETSI ETS 300 381 (1994-12); Telephony for hearing impaired people;Inductive coupling of telephone earphones to hearing aids.

• EN 50332-1:2013; Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology -- Part 1: General method for "one package equipment"

• EN 50332-2:2013; Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology -- Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design.

△ The above picture and text are from the Internet. If there is any infringement, please contact us in time and we will delete it immediately.

As the first global market access digital platform, BWTCmall.com offers a new and unprecedented online service experience for its many users.

As a technology-driven company, BWTCmall.com is committed to developing a powerful and scalable platform that not only enables global manufacturers to quickly and accurately find the best way to reach the global market, but also to experience cost-effective cutting-edge technology and services. Let the global market access market truly enter a virtuous circle of fairness, objectivity, harmony and win-win.

Please visit the solution for get your best way of testing and certification / approvals to the target market.